Scalarworks KICK/07 ACRO Top Ring Mount - High - Black

The Scalarworks KICK/07 High adds a piggyback Aimpoint ACRO-footprint red dot to a FUSE/02 or FUSE/03 scope mount in the lightest way possible — 0.81 ounces of 7075-T6 aluminum and 4140H steel that attaches directly to the ring top, positions the ACRO 1.06 inches above the scope tube, and clears taller turret housings that the Low variant cannot accommodate, made in the USA.

The Scalarworks KICK/07 High (SW3520) is a 12 o'clock ring-top extension mount for Aimpoint ACRO P-2, ACRO C-2, ACRO P-1, and Steiner MPS optics, compatible with FUSE/02 and FUSE/03 scope mounts. Height above scope tube top: 27mm / 1.06 inches. Weight: 23g / 0.81 oz. Materials: 7075-T6 aluminum, 4140H steel hardware. Finish: Type III anodized / flash nitride. Includes: KICK/07 mount, 2x M4x0.7 nylon-patched screws, T10 Torx bit, T20 Torx bit, manual. Made in USA.

The High variant's 27mm / 1.06-inch clearance above the scope tube top is the specification that determines whether this or the Low variant is correct for a given setup — scopes with tall turret assemblies, large diameter turret caps, or high-profile exposed turret housings that extend significantly above the scope body require the additional clearance of the High to prevent the ACRO from contacting the turret during installation or use. The Low's 14mm works with most standard-turret LPVOs; the High is the correct choice when the scope's turret height exceeds that clearance or when additional elevation between the scope body and ACRO is preferred for sight picture comfort. The KICK/07 attaches directly to the ring top of the FUSE/02 or FUSE/03 rather than occupying a separate receiver rail position — the piggyback configuration keeps the ACRO co-located with the scope on the same mounting platform, consuming no additional rail real estate and adding only 0.81 ounces to the total FUSE system weight. The combined FUSE/02 plus KICK/07 system weighs 162 grams — lighter than the Reptilia AUS plus ROF-90 at 176 grams and substantially lighter than the Badger Ordnance C.O.M.M. plus 12TOP system at 229 grams, providing the full piggyback scope-and-dot capability at a significant system weight advantage. Nylon-patched M4 screws provide the thread retention needed to hold the mount securely on a duty or hard-use rifle without threadlocker.

Height above scope tube: 27mm / 1.06 inches (High / SW3520). Weight: 23g / 0.81 oz. Compatible optics: Aimpoint ACRO P-2, C-2, P-1; Steiner MPS. Compatible mounts: Scalarworks FUSE/02, FUSE/03. Materials: 7075-T6 aluminum, 4140H steel. Finish: Type III anodized / flash nitride. Includes: mount, 2x M4x0.7 nylon-patched screws, T10 and T20 Torx bits, manual. Made in USA.

High variant's 1.06-inch clearance accommodates taller turret housings that the Low cannot clear — the correct choice when scope turret height exceeds 14mm above the tube body. Ring-top attachment consumes zero receiver rail space. FUSE/02 plus KICK/07 system totals 162 grams — lighter than Reptilia and Badger Ordnance equivalent piggyback configurations. Nylon-patched screws provide thread retention without threadlocker.

The right ACRO piggyback mount for FUSE/02 and FUSE/03 users whose scope's turret height requires High clearance — 0.81 ounces, zero rail space consumed, Aimpoint ACRO and Steiner MPS compatible, made in the USA.